Early Shut-Off - Sensor Failure; Manual Sensor Shut-Off - "Stop Sensor - Dexcom SEVEN PLUS User Manual

7.2.1 EARLY SHUT-OFF – SENSOR FAILURE
During use the Receiver may detect a series of issues with your Sensor signal where it can
no longer determine what your glucose reading is (see Chapter 8, Section 8.3, "Sensor Failed
Troubleshooting"). At this time the System will automatically turn off and show the screen to the
right:
If you see this screen then your continuous glucose monitoring
session has ended. Press the
HELPFUL HINT
• If you removed your Sensor before telling the Receiver, the Failed Sensor Screen will show up
automatically. You must press
new Sensor.
7.2.2 MANUAL SENSOR SHUT-OFF – "STOP SENSOR"
To manually end your Sensor session, use the Stop Sensor Menu.
This Menu title will only appear during a Sensor wear period. You
must have already started a Sensor with the Start Sensor Menu,
and the Sensor Session must not have expired (Chapter 7,
"Completing Your Continuous Glucose Monitoring Session") or
failed (Chapter 8, Section 8.3, "Sensor Failed Troubleshooting").
Press the button to confirm that you want to stop the Sensor.
OK
HELPFUL HINT
• You cannot reverse this decision after the final
stop the Sensor wear period.
button to clear this screen.
C
before inserting a
OK
. Press the
OK
Failed Sensor Screen
button if you do not want to
C
SEVEN PLUS User's Guide | 89