Setting The Supervisor Password - Panasonic CF-73 Series Reference Manual

Security Measures

Setting the Supervisor Password

(enabling, changing, disabling)
When the correct password is inputted, the computer will start.
When three incorrect password attempts or nothing is input for one minute, the computer
will power off.
*1
Supervisor Password or User Password set in the Setup Utility (not the Windows password).
1
Run the Setup Utility. (
2
Using either
3
Using either
Enter
.
4
Only when the Supervisor Password has been set:
Enter your password at [Enter Current Password] and press
5
Enter your password at [Enter New Password] and press
To disable the Supervisor Password
Press only Enter.
6
Re-enter your password at [Confirm New Password] and press
Enter
.
To disable the Supervisor Password
Press only Enter.
7
At [Setup Notice], press
8
F10
Press and select [Yes], then press
CAUTION
Do not forget your password. If your Supervisor Password is forgotten, you will be
unable to use your computer. Contact Panasonic Technical Support.
page 76)
or , select [Security].
or , select [Set Supervisor Password] and press
Enter
.
26
Enter
Enter
.
Enter
.
.