Touch Pad - Panasonic CF-R1 Series Reference Manual

Touch Pad

Work Surface
Right Button
Left Button
Use the touch pad to move the cursor on the display and perform normal computer
operations.
NOTE
By design the touch pad is to be used with a finger tip only. Therefore, do not use
any implement which causes damage on the work surface.
Function
Moving the Cursor
Tapping/Clicking
Double-Tapping/
Double-Clicking
Dragging
Scroll
NOTE
Refer to [Mouse Properties]* for information on basic operations other than the
above.
* Windows 2000 : Select [Start] - [Settings] - [Control Panel] - [Mouse]
Windows XP : Select [start] - [Control Panel] - [Printers and Other Hard-
Windows 2000
The help message in [Settings] for [Mouse Properties] - [Device Settings] will
be displayed in the same language as the one set for [Control Panel] - [Re-
gional Options] - [General] - [Your locale (location)].
Windows XP
The help message in [Settings] for [Mouse Properties] - [Device Settings] will
be displayed in the same language as the one set for [Control Panel] - [Date,
Time, Language, and Regional Options] - [Regional and Language Options] -
[Standards and formats].
Operation
Move the tip of your finger
lightly over the work surface.
tapping
double-tapping
Two quick taps, but on the
second tap leaving your fin-
ger down (applying pres-
sure) and moving it on the
work surface.
page 8
ware] - [Mouse].
or
clicking
or
double-clicking
or
While holding down the
button, moving your finger
on the work surface.
7