Diverting Calls - Lucent Technologies DT3 Telephone Manual

Switching No Calls On/Off
"....and a period of silence on
your part would be welcome."
Clement Attlee
Displaying an Absence Message
Forwarding Calls
Forward - Alias:
- Follow me.
- Call forward.
- Remote forward.
INDeX 8.1 - DT 3/4/5 Telephone Guide
Pressing NO CALLS switches it on or off. When on, you hear
broken dial tone if you lift the handset or press ANSWER
RELEASE but you can still make calls. How it works depends
on if you have set a Divert All number (see page 20) .
– With a Divert All Set: The -symbol above the NO CALLS
key stays on. All calls go to the divert number but unlike
divert all, even that number cannot call you.
– With no Divert All Set: The -symbol above the NO CALLS
key flashes and callers hear continuous tone.
You can select an absence message to display on your phone.
It then also appears on any other suitable phones that calls you
(unless you have a Divert All number in use) .
To select an absence message:
1. Press PROGRAM and then ABSENT.
2. Enter the phone's passcode (see page 34).
3. Press CHANGE to select a message (or CLEAR to
cancel an existing message). For just personal text, select
CUSTOM. Then press DONE.
4. PERSONAL TEXT? appears. To have no personal text,
press NONE. To add some text press EDIT. Enter text as
for editing the phone name (see page 35) .
5. When complete, press SET.
Forward allows you to remotely set your phone to divert. By
default, the system bars remote forwarding extensions. Contact
your System Manager to enable this feature.
To set a forward:
1. Press PROGRAM and then FORWARD.
2. The display shows FORWARD FROM ?. Enter the phone
from which to forward calls and press DONE.
3. Enter that phone's passcode (see page 34) .
4. The display shows FORWARD TO ? and the phone's
current Divert All number (if set).
5. To change the forward, press CANCEL and enter the new
number for diverting all calls.
6. Press DONE and then press PROGRAM to finish.
Diverting Calls – Page 21
38DHB0002UKAL - Issue 1 (08/99)