Phone Settings; The Phone Passcode; Background Music - Lucent Technologies DT3 Telephone Manual

Page 34

Phone Settings

The Phone Passcode

Background Music

INDeX 8.1 - DT 3/4/5 Telephone Guide
If the phone displays ENTER PASSCODE, it expects you to
dial its four-digit passcode. The default passcode is 0000.
Wrong passcode entry can result in the phone becoming
barred. Barred phones cannot access features requiring
passcode entry. They can make external calls but only to
special numbers, eg. emergency numbers.
To enter the phone's passcode:
1. Dial the 4-digit passcode. If you make a mistake, press
CANCEL and restart entry.
2. If you enter the wrong number, the phone displays
REENTER . Enter the passcode again or press PROGRAM
to end programming.
3. If you enter the wrong passcode 5 times, the phone displays
THIS TERMINAL IS BARRED . To unbar your phone contact
the System Manager.
To change the phone's passcode:
1. Press PROGRAM and then SCROLL twice. Press PASS.
2. Enter the current passcode.
3. The display shows ENTER NEW CODE. Enter the new
passcode (all passcodes must be four digits).
– To restart after a mistake, press CANCEL.
If your system has external Music-on-Hold installed, you may be
able to have it play when the phone is not in use. The phone's
speaker volume controls the loudness of the music (see page
14) .
To switch background music on/off:
1. Press PROGRAM and then SCROLL. Press MUSIC.
2. Enter the phone's passcode (see page 34) .
3. The display shows the NO MUSIC or BACKGROUND
MUSIC.
4. To change the current setting press CHANGE.
5. Press DONE and then press PROGRAM to finish.
38DHB0002UKAL - Issue 1 (08/99)