Diverting Calls - Lucent Technologies INDeX 20AT User Manual

Page 20 - Diverting Calls

Diverting Calls

Using Diverts
Divert All - Alias:
- Manager transfer.
- Secretary filter.
Divert No Answer - Alias:
- Divert no reply.
No Calls - Alias:
- Do not disturb.
Switching No Calls On/Off
INDeX 20AT Telephone User's Guide
Your phone can have diverts for different situations, i.e.
when busy, not answering or to divert all calls. You can
also select no calls (which uses the Divert All number if
set) .
– Divert on busy: Calls divert when your phone is on a
call. When set, callers cannot set a callback or camp on
to your phone.
– Divert on no answer: Calls divert after ringing your
phone for a set period (see page 22) .
– Divert all: All calls to your phone are diverted. Only the
extension to which you divert calls can ring you.
– No calls: Switching no calls on stops all calls. Callers
hear continuous tone or divert to the Divert All number
if set.
If you switch on no calls after setting a divert all number, it
diverts all callers and even the divert extension cannot call
you. If you switch it on without setting a divert all number,
all callers hear continuous tone.
Whilst on, you hear a repeated single pip if you lift the
handset, but you can still make calls. Switching no calls on
takes the phone out of group.
Note: Your System Manager can prevent use of the No
Calls feature.
To switch no calls on/off:
1. Lift the handset and immediately dial 0.
2. Broken dial tone: Dial 60 (no calls on) or 61 (no calls
off) .
3. Replace the handset to finish.
38DHB0002UKDU - Issue 1 February 2000