Lucent Technologies DT3 Telephone Manual page 27

Park Transferring Calls
Alerting a Busy Extension
Alert - Alias:
- Polite intrusion.
Intrude - Alias:
- Forced intrusion.
Remotely Switching No Calls/Divert On/Off
INDeX 8.1 - DT 3/4/5 Telephone Guide
During calls, full line Soft DSS keys display <-PARK next to
each name. Pressing the -key next a <-PARK option, transfers
and parks your caller against that extension.
To park transfer a call:
1. Note the call's line number on the display.
2. Press the -key on the right of the Soft DSS name. The
system transfers the call and parks it at that extension.
3. Press the -key on the left of the Soft DSS name to call that
extension and announce the parked caller.
4. If the Soft DSS extension does not answer or want the call,
dial the line number to retrieve the parked call.
A solid -symbol next to a Soft DSS key means that extension
is busy. In full-line mode, you can send them an alert (only to
another display phone) . This places you on hold against their
extension.
To alert the extension:
1. Press the display key on the right of the name. The display
shows details of the extension's current call.
2. If ALERT does not appear, the extension is busy for
reasons other than a call, eg. handset off-hook.
3. Press ALERT. The display shows HOLDING.
4. If INTRUDE appears, you can intrude on the call (see page
13) .
In full-line mode, Soft DSS keys allow you to remotely switch
the extension's NO CALLS or DIVERT ALL on/off.
To switch on/off divert all or no calls:
1. Press the -key on the right of the extension name.
2. If ALERT appears the extension is busy. Press the
on the right of the extension name again (press SCROLL if
necessary to redisplay the name).
3. Select the option to change; NOCALLS or DIVERT
– DIVERT does not appear if the extension does not have a
Divert All number set).
4. The Soft DSS display shows the new status.
Manager-Secretary Working – Page 27
38DHB0002UKAL - Issue 1 (08/99)
key