Contents Contents Introduction..................4 Introduction to the DSS/BLF ..................4 The BLF Lamps......................5 The Power Supply Unit ..................... 5 Using the DSS/BLF ..............6 Notes ......................... 6 Setting up the DSS Keys................... 6 Making Calls......................6 Answering a Call - Fast Green Flash ................ 6 Speed Dials .......................
Introduction Introduction to the DSS/BLF The DSS/BLF works in association with your DT or TT display phone. It provides your phone with an additional 42 DSS keys. You can associate several DSS/BLF's with your DT or TT display phone. Each DSS/BLF requires its own telephone socket and a mains power socket.
– Indicates a call to a Pilot number set under the DSS key. The Power Supply Unit The DSS/BLF requires the use of a power supply unit (PSU) plugged into a mains power socket. You must only use the PSU's supplied by Lucent Technologies.
Page 6 Using the DSS/BLF Notes Once associated with a phone, the DSS/BLF provides that phone with an additional 42 DSS keys. This section gives examples of some of the functions of the keys. To check the unit is associated: 1.
Using the DSS/BLF – Page 7 Speed Dials To dial a speed dial: 1. Press the DSS key under which the speed dial store is set. Holding Calls - Solid Green To hold a call: 1. Press HOLD on your phone.
– A fast flashing green lamp indicates an incoming call on a line. To pickup the call: 1. Press the DSS key. 2. Continue the call handsfree (not DT-4) or lift the handset. INDeX DSS/BLF Guide 38GDE00001SAR - Issue 5 (January 1999)
Setting Up the DSS/BLF 1. Associating the DSS/BLF Before using the DSS/BLF, you must associate it with a DT or TT display phone. You can associate several DSS/BLF's with the same phone if required (to reassociate a DSS/BLF with a different phone after setting up the DSS keys, see page 10).
2. While holding down any two DSS keys in different columns, switch the unit's power supply back on. 3. The unit should switch back on with the top keys flashing alternate green and red. Continue from Step 3 of associating a DSS/BLF (see page 9). 4. Clearing Settings Inserting any other type of phone (even temporarily) into the DSS/BLF's socket, erases all the DSS/BLF's programming.
Label Template A template exists for creating labels for the DSS keys on DT phones, TT phones and DSS/BLF units. The template file (SDXLABEL.DOT) works with Microsoft Word for Windows 2, 6 and 7. You can download a copy of the DSS Label Template from the web site http://www.sdxplc.com.
DSS/BLF units. In addition a terminal link bracket is available. This allows you to link the wall brackets on two units, eg. to link a DSS/BLF with a DT/TT phone or to link two DSS/BLF’s together. Contact your INDeX maintainer for details on obtaining these items.