Diverting Calls; Using Diverts - Lucent Technologies Index User Manual

Diverting Calls

Using Diverts

Divert All – Alias:
- Manager transfer.
- Secretary filter.
Divert No Answer - Alias:
- Divert no reply.
No Calls – Alias:
- Do not disturb.
Switching No Calls On/Off
38GDE00001SAD - Issue 8 January 2000
Your phone can have diverts for different situations, i.e. when busy, not
answering or to divert all calls. You can also select no calls (which uses the
Divert All number if set).
– Divert on busy: Calls divert when your phone is on a call. When set,
callers cannot set a callback or camp on to your phone.
– Divert on no answer: Calls divert after ringing your phone for a set
period (see page 17).
– Divert all: All calls to your phone are diverted. Only the extension to
which you divert calls can ring you.
– No calls: Switching no calls on stops all calls. Callers hear continuous
tone or divert to the Divert All number if set.
If you switch on no calls after setting a divert all number, it diverts all callers
and even the divert extension cannot call you. If you switch it on without
setting a divert all number, all callers hear continuous tone.
Whilst on, you hear a repeated single pip if you lift the handset, but you can
still make calls. Switching no calls on takes the phone out of group.
Note: Your System Manager can prevent use of the no calls feature.
To switch no calls on/off:
1. Lift the handset and immediately dial 0. You will hear either:
- Broken dial tone: Dial 60 (no calls on) or 61 (no calls off).
Or
-. Broken dial tone: Replace the handset to finish.
Diverting Calls – Page 15
INDeX Standard Telephone User's Guide