Busy Or Unanswered - Lucent Technologies DT3 Telephone Manual

Leave a Message
Camp On and Wait
Camp On - Alias:
Wait on busy.
Intrude
Intrude - Alias:
- Executive intrusion.
- Forced intrusion.
- Busy override.
Monitoring a Call
INDeX 8.1 - DT 3/4/5 Telephone Guide
You can leave your extension number as a message for
someone to call you (see page 16) . If their extension has a
message lamp, it lights (supported on DT, TT, FT 1M and FT
2/3/4 phones) . If your call is diverted, the message goes to the
extension you first called.
To leave a message:
1. Press MESSAGE. Your call ends unless the extension
called has already reached its limit of stored messages.
If the extension you call is busy, you can 'camp on' and wait.
This flashes the lamp on the busy extension and if it has a
suitable display, shows your name, number and CALL
WAITING. While camped on your phone gives regular pips and
you cannot make or receive other calls.
To Camp On to a busy extension:
1. Press CAMP ON.
2. To replace the handset without cancelling the camp on,
press SPEAKER first.
3. To end the camp on, press ANSWER RELEASE or replace
the handset.
If your phone can intrude, an INTRUDE option appears when
calling a busy extension. Your System Manager controls which
extensions can intrude and be intruded on.
To intrude on a call:
1. Press INTRUDE.
2. There is a short delay during which you and the other parties
hear several short pips.
3. After the intrusion, the system gives regular pips.
Silent monitoring lets you listen to another call without being
heard. Note that there are restrictions on who can use this
function (contact your System Maintainer). If your phone can
use silent monitoring, a LISTEN option appears.
Busy or Unanswered – Page 13
38DHB0002UKAL - Issue 1 (08/99)