Lucent Technologies DT3 Telephone Manual page 29

Changing the Soft DSS Display Mode
Changing the Soft DSS Extensions
Changing the Soft DSS Usage
INDeX 8.1 - DT 3/4/5 Telephone Guide
The display mode sets how many Soft DSS keys you can have;
4 in half-line mode or 2 in full-line mode. Note that if you change
mode from half-line to full-line, you lose the last two extensions
entered.
To set the Soft DSS key display mode:
1. Press PROGRAM and SCROLL. Press SOFT DSS.
2. Enter the phone's passcode (see page 34) .
3. Press MODE. The display shows the current mode.
4. To change mode, press CHANGE.
5. Press DONE. The display goes to extension entry.
6. Press PROGRAM to finish.
The Soft DSS features only work correctly with extension
numbers. Do not set lines or groups as Soft DSS keys.
To set a Soft DSS key extension:
1. Press PROGRAM and SCROLL. Press SOFT DSS.
2. Enter the phone's passcode (see page 34 ).
3. Press EXTNS. to display the first number set.
– To cancel the number, press CANCEL.
– To display the next number, press NEXT.
– To enter a new number, press NEXT until the top-right
display goes blank, then enter the number.
4. Press PROGRAM to finish.
When using Soft DSS Keys to make a call, the usage setting of
the two phones determines the type of call that occurs (see
diagram) . The phone's usage setting affects all of its Soft DSS
keys. The system treats extensions with no Soft DSS Keys as
set to NORMAL CALL.
To set the soft DSS key usage:
1. Press PROGRAM and SCROLL. Press SOFT DSS.
2. Enter the phone's passcode (see page 34) .
3. Press USAGE. The display shows the current setting.
4. To change the current usage, press CHANGE.
5. Press PROGRAM to finish.
Manager-Secretary Setup – Page 29
38DHB0002UKAL - Issue 1 (08/99)