Lucent Technologies DT3 Telephone Manual page 11

If ENTER ACCOUNT Appears
If ENTER PIN Appears
Roaming PIN's
Roaming PIN's - Alias:
- Mobile access.
INDeX 8.1 - DT 3/4/5 Telephone Guide
If ENTER ACCOUNT appears when making an external call,
you must enter an account code to continue. The system
checks this against its list of codes before allowing the call (To
enter an account code at any time during a call, see page 15) .
To enter a forced account code:
1. Dial the account code. If you make a mistake, press
DELETE to delete the last digit entered.
2. When you have entered the full code, press DONE.
3. If the system does not recognise the code it displays
REENTER ACCOUNT . Repeat the entry or end the call.
4. If the code is recognised, your call can continue.
If ENTER PIN appears when making an external call, you must
enter a PIN code to continue. When used, the PIN code's call
barring settings override those of the phone from which you
dial. The system checks the code against its list of codes before
allowing the call.
To enter a forced PIN code:
1. Dial your PIN code. If you make a mistake, press DELETE
to delete the last digit entered.
2. When you have entered your PIN code, press DONE.
3. If the system does not recognise the code it gives a constant
tone. End your call attempt.
4. If the code is recognised, your call can continue.
When you use a PIN code, its settings override those of the
phone from which you dial. Note however that the system
prefixes digits to force the call externally.
To use a roaming PIN:
1. Press # and enter your PIN code. If you make a mistake,
press DELETE to delete the last digit entered.
2. When you have entered your PIN code, press DONE.
3. If the system does not recognise the code, your phone gives
a constant tone. End your call attempt.
4. If the code is recognised, your call can continue.
Speed Dials, PIN & Account Codes – Page 11
38DHB0002UKAL - Issue 1 (08/99)