While reasonable efforts were made to ensure that the information in this document was complete and accurate at the time of printing, Lucent Technologies can assume no responsibility for any errors. Changes or corrections to the information contained in this document may be incorporated into future issues.
Page 3
0.5” x 1.75” label, such as the Avery 5267 Return Address label. The labels are available on 8-1/2” x 11” laser-printable sheets. The extension number, entire telephone number, or other information can be typed on the labels. There is a template in Microsoft Word for Windows ‘97 that simplifies the preparation of these labels.
Do not plug the handset cord into the line jack or the data jack on your telephone since it could damage your handset and the telephone. 1. Turn the telephone upside down so that you can see the bottom of the telephone. See Figure 2. Desktop stand Figure 2.
2. To place a call, next, dial the desired number. 3. To end the call: On the 6218, hang up the handset. On the 6220 telephone, hang up the handset or press , whichever is active.
Page 6
To label and reinstall the programmable dialing buttons designation card on your telephone 1. Remove the plastic card cover from the telephone by placing your fingers at the top and bottom and flexing the card outward. Then, lift the button designation card from out of its cavity on the telephone.
(or original shipping receipt), and description of the operating problem. After replacing your telephone, Lucent Technologies will ship it to you at no cost to you...