System Specifications - NEC Express5800 User Manual

System Specifications

Item
CPU
Chipset
Memory
Graphics (VRAM)
Auxiliary
input device
Additional
bay
Additional
slot
LAN interface
External
interface
Cabinet design
External dimensions
Weight
Power supply
Power consumption
Environmental
requirements
Others
B-2 Specifications
NEC Express5800/120Ee
Type Intel Pentium III processor-S (1.26 GHz/512KB)
Number of processors 1
Maximum 2
ServerWorks ServerSet III LE-T +CSB5
Standard 128 MB
Maximum 4GB (The standard DIMM must be replaced.)
Expansion unit 1 DIMM (64/128/256/512/1024MB)
Expansion times 4 times
Memory module SDRAM DIMM (PC133 Buffered Type)
Error check ECC
ATI RAGE XL (8MB VRAM)
3.5-inch drive × 1
Floppy disk(standard)
Hard disk (standard) None
120GB - 60GB × 2 (IDE)
Hard disk (maximum)
ATAPI interface × 1 (Load on tray type, x48 speed)
CD-ROM (standard)
5.25-inch 3 slots (1 slot is for CD-ROM)
3.5-inch 4 slots
PCI (64-bit) 2 slots
PCI (32-bit) 4 slots
100BASE-TX/10BASE-T (1 port)
Keyboard MINI DIN 6-pin connector (1 port)
Mouse MINI DIN 6-pin connector (1 port)
USB 4-pin (2 ports)
Serial D-sub 9-pin (2 ports)
Parallel D-sub 25-pin (1 port)
Network RJ-45 (1 port)
Display MINI D-sub 15-pin (1 port)
Mini tower
230 (width) × 450 (height) × 480 (depth) mm (with stabilizers)
21 kg (Max.)
100 to 120 VAC ±10%, 200 to 240 VAC ±10%, 50/60 Hz ±1 Hz
275 VA, 264 W
Temperature 10 to 35°C
Humidity 20 to 80% RH (no condensation)
NEC EXPRESSBUILDER supported, NEC ESMPRO provided in
the standard configuration