13. Record the processor in the equipment log.
14. Replace the side panel, plug in the system power cord, and turn on the
system.
DIMMs
The system board contains four DIMM sockets labeled 1 through 4
(Figure 4-10, A). Each socket can hold a single 72-bit DIMM module with
128MB, 256MB, 512MB, or 1GB of memory. When all four sockets are
populated, the system board supports a maximum of 4 GB of memory with 1GB
DIMMs. A DIMM will always be installed in socket 1. When you install
additional DIMMs, you must start with the first empty socket next to the
DIMMs already installed. When you remove DIMMs, you must start with the
highest number occupied DIMM socket on the system board.
4-12 Upgrading Your System
1 3
Figure 4-10. DIMM Locations
2 4
A