NEC Express5800 User Manual page 65

Figure 4-8. Installing Thermal Tape
8. Position the heatsink above the processor so the thermal tape square
(Figure 4-8, A) attached to the bottom of the heatsink is directly positioned
above the processor.
When performing the next three steps, be sure the heatsink
is held firmly in position. If the heatsink should slide across
the top of the processor, the thermal tape may be damaged.
9. Position the heatsink clip over the center of the heatsink and attach the small
end of the clip to the tab located on the base of the ZIF socket. See Figure 4-
9, A.
Figure 4-9. Positioning the Heatsink Clip
10. Insert a flat blade screwdriver into the tab of the retention clip.
11. Secure the clip onto the tab of the ZIF socket.
12. Connect the processor fan power cable to the processor heatsink fan and the
system board. See Figure 4-3, B and D for the location of the processor fan
power connectors.
A
! CAUTION
Upgrading Your System 4-11
A