NEC Express5800 User Manual page 42

Feature
Parallel Port
Parallel Mode
Diskette Controller
Mouse
LAN Controller
VGA Controller
USB Controller
Legacy USB
Support
IDE Controller
3-8 Configuring Your System
Display Only Description
Disabled Disables the parallel port or
378, IRQ5 selects the base address and
378, IRQ7
interrupt (IRQ) for the Parallel
278, IRQ5 port.
278, IRQ7
3BC, IRQ5
3BC, IRQ7
Auto
Output only Selects the parallel port
Bi-directional operation mode.
EPP
ECP, DMA1
ECP, DMA3
Disabled Configure using these options:
Enabled (Disabled) No configuration.
(Enabled) User configuration
Disabled Disabled prevents any
Enabled installed PS/2 mouse from
Auto Detect
functioning, but frees up
IRQ12.
Enabled forces the PS/2
mouse port to be enabled
regardless if a mouse is
present.
Auto Detect enables the PS/2
mouse only if present.
OS Controlled is displayed
only if the OS controls the
mouse.
Disabled Enable or disable the on-board
Enabled LAN controller.
Disabled Enable or disable the on-board
Enabled
VGA controller.
Disabled Enables or disables the on-
Enabled
board USB controller.
Disabled
Enable or disable the use of a
Enabled USB keyboard even if the OS
does not support USB. If set to
Enabled, the USB driver in
BIOS ROM is loaded at start-
up.
Both
Enables or disables the on-
board IDE controller.
Your Setting