NEC Express5800 User Manual page 36

Configuring Your System
Configuration and setup utilities are used to change your system configuration.
You can configure your system, as well as option boards you may add to your
system, using the BIOS Setup Utility. Several unique system parameters are
configured using the BIOS Setup, which is stored in the system FLASH
memory.
If your system has been factory configured, the BIOS Setup does not need to be
run unless you want to change the password or security features, add certain
types of option boards or devices, or upgrade your system board.
This chapter also provides information on several system configuration
parameters that are set by jumpers on the system board. However, these
parameters do not usually require change.
Use the E
XPRESS
3-2 Configuring Your System
B CD-ROM to create the device driver diskettes.
UILDER