Changing Hardware Options - Fujitsu DL6400Pro User Manual

Changing Hardware Options

Changing
Hardware
Options
HARDWRE item Options
<PPR-OUT>
CNTONLY
DETECT
IGNORE
<PRT-DIR> BI-DIR
UNI-DIR
<BUZZER>
ON
OFF
8-24
HARDWRE defines printer hardware conditions. If you are using the
optional RS-232C serial interface, serial interface options must be set
correctly for the printer to function with system hardware.
Table 8-4 lists HARDWRE items and options in the order they are
printed. The procedure for changing hardware options follows
Table 8-4.
Table 8–4 HARDWRE options
Description
Specifies how the printer responds to a paper outage.
The printer detects paper outage only for continuous
forms. Printing stops, and the PAPER OUT indicator (or
ALARM indicator) glows amber.
The printer detects paper outage for both continuous
forms and cut sheets. Printing stops, and the PAPER
OUT indicator (or ALARM indicator) glows amber.
The printer ignores paper outage for both continuous
forms and cutsheets. Printing continues until no more
data remains. No PAPER OUT (or ALARM) warning
occurs.
Note:
For cut-sheet feeders, printing stops, and the PAPER
OUT (or ALARM indicator) indicator glows amber,
regardless of the <PPR-OUT> setting.
The printer performs bidirectional printing in both
directions while seeking the next print direction, this
option is used for a shorter print time.
The printer performs unidirectional printing. This feature
is useful for printing vertical lines in tables even if vertical
alignment is not adjusted. Printing is slower than
bidirectional printing.
Enables or disables the printer status buzzer.
Buzzer is on. This setting is recommended. The printer
beeps to indicate paper outages and other conditions.
Buzzer is off.
User's Manual