Remote Management - D-Link DSR-150 User Manual

Section 9 - Maintenance
Path: Maintenance > Management > Remote Management
Enable this feature to be able to manage the router from a remote location, using HTTPS or Telnet. Both HTTPS
and Telnet access can be restricted to a subset of IP addresses. The router administrator can define a known PC,
single IP address or range of IP addresses that are allowed to access the GUI with HTTPS. The opened port for SSL
traffic can be changed from the default of 443 at the same time as defining the allowed remote management IP
address range.
1. Click Maintenance > Management > Remote Management.
2. Complete the fields from the table below and click Save.
Field
Enable Remote Management
HTTPS Port No.
SSH
SNMP
Access Type
Respond to Ping
Save
D-Link DSR-Series User Manual

Remote Management

Toggle to ON to enable remote management.
Enter the port for HTTPS access. The default port is 443.
Toggle ON to enable SSH (Secure Shell) protocol which can be used to access the CLI over the network
from a remote host.
Toggle to ON to enable SNMP for remote management.
Select either All IP Addresses, IP Address Range (enter an IP range), or Only Selected PC (enter an IP
address).
Toggle to ON to allow the router to respond to ping requests from the WAN.
Click to save and activate your settings.
Description
172