D-Link DSR-150 User Manual page 281

Appendix D - Log Output Reference
Recd IE data for non-existent AP %s
Recd WSC Start command without
interface name
Recd WSC start for non-existent AP %s
Recd WSC start for wrong AP %s
Unable to send WSC_WLAN_CMD_PORT
to WSC
Failed to get the ap context for %s
WPS can only be applied to WPA/WPA2
security profiles
wpsEnable: running wsccmd failed
Failed to get the ap context for %s
WPS conf. under non WPA/WPA2 security
setting
Failed to reset the Beacon Frame IE in the
driver
Failed to reset the Beacon Frame IE in the
driver
WPS method cannot be NULL
PIN value length should be a multiple of
4 !!
Failed to initiate PIN based association,
PIN = %s
Failed to initiate PBC based enrolle
association
Invalid association mode. (Allowed modes
: PIN/PBC)
wpsEnable: running wsccmd failed
Failed to send QUIT command to WSC
from DOT11
Failed to clear off the WPS process
missing profile name
A profile exists with the same name
Error in allocating memory for profile
missing profile name
missing profile name
Profile name and interface name must be
specified
Profile %s does not exist
Could not set profile %s on the interface
%s
missing profile name
Profile %s does not exist
Profile %s does not exist
SSID should not be longer than %d
Profile %s does not exist
D-Link DSR-Series User Manual
pnacPhyPortParamSet: device invalid
ERROR
%s%d
pnacPhyPortParamSet: EIOCGADDR
ERROR
ioctl failed
pnacPhyPortParamSet: multicast addr
ERROR
add ioctl failed
pnacPhyPortParamUnset: multicast
ERROR
addr del ioctl failed
ERROR pnacPDUXmit: Invalid arguments
ERROR pnacPDUXmit: failed to get M_BLK_ID
from pnacIsInterfaceUp: device %s%d
ERROR
invalid
pnacRecvRtn: dropping received packet
ERROR
as port is"
ERROR pnacSendRtn: Invalid arguments
pnacSendRtn: no physical port
ERROR
corresponding to"
ERROR pnacSendRtn: dropping packet as port"
pnacAuthBuildRC4KeyDesc:
ERROR
adpEncryptInit(RC4) failed
pnacAuthBuildRC4KeyDesc:
ERROR
adpCipherContextCtrl"
pnacDot11UserSet: incorrect buffer
ERROR
length
ERROR PNAC user component id not set.
ERROR pnacKeyInfoGet:failed to allocate buffer
PNAC user comp id not set. dropping
ERROR
EAPOL key pkt
pnacUmiPortPaeParamSet: invalid
ERROR
buffer received
ERROR Error from pnacRecvASInfoMessage: "
ERROR pnacRecvASInfoMessage: "
pnacRecvASInfoMessage: Bad info
ERROR
length
ERROR Error from pnacLibInit: malloc failed
ERROR could not create phy ports lock
ERROR could not create nodes ports lock
ERROR port exists for iface - %s
ERROR pnacPhyPortCreate failed
ERROR kpnacPhyPortCreate failed
ERROR invalid argument
pnacAuthConfig: maxAuth limit
ERROR
reached
ERROR pnacAuthConfig: malloc failed
Error from pnacAuthConfig: pAsArg
ERROR
cannot be NULL
Error from pnacAuthConfig: receive
ERROR
routine hook "
ERROR pnacAuthConfig: pnacAuthInit failed
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
268