Section 6 - Wireless Settings
3. Complete the fields in the table below and click Save.
Field
AP Name
Profile Name
Active Time
Schedule Control
Start/Stop Time
WLAN Partition
Save
D-Link DSR-Series User Manual
Enter a name for your virtual access point.
Select a profile from the drop-down menu to associate this access point with. If you do not want to use the
default profile, create a profile (refer to the next page) and then create an access point.
Toggle to ON to "turn on" this access point.
Toggle to ON if you want to specify a time to have this access point turned on.
Enter a start and stop time.
Toggle to ON to prevent associated wireless clients from communicating with each other.
Click Save at the bottom to save and activate your settings.
Description
81