D-Link DSR-150 User Manual page 170

Section 8 - Security
3. Complete the fields from the table below and click Save.
Field
Name
Enable
Protocol
Interface
Outgoing (Trigger) Port Range Enter the start and end trigger port range.
Incoming Port Range
Save
4. Click on the Application Rules Status tab to see a list of rules and their status.
D-Link DSR-Series User Manual
Enter a name for your rule.
Toggle to ON to activate the rule.
Select TCP or UDP.
Select either LAN or DMZ.
Enter the port range to open.
Click to save your settings.
Description
157