D-Link DSR-150 User Manual page 284

Appendix D - Log Output Reference
sqlite3QueryResGet failed
failed to configure WPS on %s
sqlite3QueryResGet failed
sqlite3QueryResGet failed
sqlite3QueryResGet failed
sqlite3QueryResGet failed
sqlite3QueryResGet failed
no VAP rows returned. expected one
multiple VAP rows returned. expected one
sqlite3QueryResGet failed
invalid query result. ncols=%d nrows=%d
%s:VAP(%s) create failed
sqlite3QueryResGet failed
invalid query result. ncols=%d nrows=%d
Log Message
DNAT: multiple ranges no longer supported
DNAT: Target size %u wrong for %u ranges,
DNAT: wrong table %s, tablename
DNAT: hook mask 0x%x bad, hook_mask
%s%d: resetting MPPC/MPPE compressor,
%s%d: wrong offset value: %d,
%s%d: wrong length of match value: %d,
%s%d: too big offset value: %d,
%s%d: cannot decode offset value,
%s%d: wrong length code: 0x%X,
%s%d: short packet (len=%d), __FUNCTION__,
%s%d: bad sequence number: %d, expected: %d,
D-Link DSR-Series User Manual
pnacUmiSuppConfig: Invalid config
ERROR
data
pnacUmiSuppConfig: Invalid backend
ERROR
name specified
pnacUmiSuppConfig: %s not
ERROR
configured for 802.1x
pnacUmiSuppConfig: could not PNAC
ERROR
port Access"
pnacUmiSuppConfig: Failed to register
ERROR
user information
pnacPortByMacDeconfig: port not
ERROR
found
pnacPortByMacDeconfig: port not
ERROR
found
ERROR pnacUmiIfDown: Invalid config data
ERROR pnacUmiIfDown: Invalid config data
Error from pnacPortDeconfig: port not
ERROR
configured
pnacUmiIfDown: could not de-
ERROR
configure port
pnacUmiPhyPortDestroy: Invalid config
ERROR
data
pnacUmiPhyPortDestroy: Invalid config
ERROR
data
pnacUmiPhyPortDestroy: Failed to
ERROR
destroy the port
Invalid config data
Facility: Kernel
Severity Log Message
DEBUG %s: %s%s:%d -> %s:%d %s,
DEBUG %s: %s%s:%d %s,
%s: Failed to add WDS MAC: %s, dev-
DEBUG
>name,
%s: Device already has WDS mac
DEBUG
address attached,
DEBUG %s: Added WDS MAC: %s, dev->name,
%s: WDS MAC address %s is not
DEBUG
known by this interface,
[madwifi] %s() : Not enough space.,
DEBUG
__FUNCTION__
DEBUG Returning to chan %d, ieeeChan
DEBUG WEP
DEBUG AES
DEBUG AES_CCM
DEBUG CKIP
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
Severity
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
271