Ipv6; Ip Mode - D-Link DSR-150 User Manual

Section 5 - Connect to the Internet
Path: Network > IPv6 > IP Mode
This page allows you to configure the IP protocol version to be used on the router. In order to support IPv6 on
your local network (LAN), you must set the router to be in IPv4 / IPv6 mode. This mode will allow IPv4 nodes to
communicate with IPv6 devices through this router.
To enable IPv6 on the router:
1. Click Network > IPv6 > IP Mode.
2. Select IPv4 & IPv6.
3. Click Save.
D-Link DSR-Series User Manual

IPv6

IP Mode

63