Set Time And Date - D-Link DSR-150 User Manual

Section 3 - Basic Configuration
1. Log in to the router.
2. Click Wizard in the upper-right side of the page. If you want to manually configure your date/time
settings, refer to "Date and Time" on page 162.
3. Click Run in the Date and Time Wizard box.
4. Click the continent from the map and then next to City, select your time zone from the drop-down
menu. Toggle Daylight Saving to ON if it applies to you and then click Next.
5. Toggle NTP server to ON to use a time server or toggle to OFF to manually enter the time and date.
6. If you selected ON, select either Default or Custom from the drop-down menu. If you selected Custom,
enter a primary and secondary NTP server address.
7. Enter the time to synchronize with the NTP server and click Save.
8. A summary page will appear. Verify your settings and then click Finish.
D-Link DSR-Series User Manual

#4 Set Time and Date

8