Administrator Settings; Change Password; Remote Management - D-Link DIR-330 User Manual

Secton 3 - Configuraton
This page will allow you to change the Administrator password. You can also enable Remote Management.
Admin Password:
Enter a new password for the administrator login. Only the
administrator can make changes to the settings.
Enable Remote
Remote management allows the DIR-330 to be configured
Management:
from the Internet by a web browser. A username and
password is still required to access the Web-Management
interface. In general, only a member of your network can
browse the built-in web pages to perform Administrator tasks.
This feature enables you to perform Administrator tasks from
the remote (Internet) host.
IP Address:
Enter the IP address of the remote computer. You may enter
* to allow a connection from any Internet address.
Port:
The port number used to access the DIR-330.
Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-330 and 8080 is the port used for the Web
Management interface. The schedule may be set to Always, which will allow the filter to always be enabled. You can create
your own times in the Tools > Schedules section.
D-Lnk DIR-330 User Manual

Administrator Settings

3