D-Link DSR-150 User Manual page 293

Appendix D - Log Output Reference
ip_ct_ras: packet dropped
ERROR registering port %d,
ERROR registering port %d,
ipt_connlimit [%d]: src=%u.%u.%u.%u:%d
dst=%u.%u.%u.%u:%d %s,
ipt_connlimit [%d]: src=%u.%u.%u.%u:%d
dst=%u.%u.%u.%u:%d new,
ipt_connlimit: Oops: invalid ct state ?
ipt_connlimit: Hmm, kmalloc failed :-(
ipt_connlimit: src=%u.%u.%u.%u
mask=%u.%u.%u.%u
_lvl PPPOL2TP: _fmt, ##args
%02X, ptr[length]
%02X, ((unsigned char *) m->msg_iov[i].iov_
base)[j]
%02X, skb->data[i]
_lvl PPPOL2TP: _fmt, ##args
%02X, ptr[length]
%02X, ((unsigned char *) m->msg_iov[i].iov_
base)[j]
%02X, skb->data[i]
_lvl PPPOL2TP: _fmt, ##args
%02X, ptr[length]
%02X, ((unsigned char *) m->msg_iov[i].iov_
base)[j]
%02X, skb->data[i]
KERN_EMERG THE value read is %d,value*/
KERN_EMERG Factory Reset button is pressed
KERN_EMERG Returing error in INTR registration
KERN_EMERG Initialzing Factory defaults
modules
Failed to allocate memory for pSipListNode
SIPALG: Memeory allocation failed for
pSipNodeEntryTbl
pkt-err %s, pktInfo.error
pkt-err %s, pktInfo.error
pkt-err %s, pktInfo.error
%s Len=%d, msg, len
%02x , ((uint8_t *) ptr)[i]
End
CVM_MOD_EXP_BASE MISMATCH cmd=%x
base=%x, cmd,
op->sizeofptr = %ld, op->sizeofptr
opcode cmd = %x, cmd
modexp opcode received
Memory Allocation failed
modexpcrt opcode received
kmalloc failed
kmalloc failed
kmalloc failed
kmalloc failed
kmalloc Failed
D-Link DSR-Series User Manual
MPPE/MPPC encryption/compression
DEBUG
module unregistered
PPP generic driver version PPP_
DEBUG
VERSION
MPPE/MPPC encryption/compression
DEBUG
module registered
MPPE/MPPC encryption/compression
DEBUG
module unregistered
PPP generic driver version PPP_
DEBUG
VERSION
DEBUG PPPoL2TP kernel driver, %s,
DEBUG PPPoL2TP kernel driver, %s,
DEBUG PPPoL2TP kernel driver, %s,
DEBUG failed to create procfs entry .
DEBUG proc dir not created ..
DEBUG Initialzing Product Data modules
DEBUG De initializing by \
DEBUG kernel UMI module loaded
DEBUG kernel UMI module unloaded
DEBUG Loading bridge module
DEBUG Unloading bridge module
DEBUG unsupported command %d, cmd
DEBUG Loading ifDev module
DEBUG Unloading ifDev module
ERROR#%d in alloc_chrdev_region,
DEBUG
result
DEBUG ERROR#%d in cdev_add, result
DEBUG using bcm switch %s, bcmswitch
privlegedID %d wanporttNo: %d,
DEBUG
privlegedID,wanportNo
DEBUG Loading mii
DEBUG Unloading mii
DEBUG %s: Version 0.1
DEBUG %s: driver unloaded, dev_info
wlan: %s backend registered, be-
DEBUG
>iab_name
DEBUG wlan: %s backend unregistered,
wlan: %s acl policy registered, iac-
DEBUG
>iac_name
wlan: %s acl policy unregistered, iac-
DEBUG
>iac_name
DEBUG %s, tmpbuf
DEBUG VLAN2
DEBUG VLAN3
DEBUG VLAN4 <%d %d>,
DEBUG %s: %s, dev_info, version
DEBUG %s: driver unloaded, dev_info
DEBUG %s, buf
DEBUG %s: %s (, dev_info, ath_hal_version
DEBUG %s: driver unloaded, dev_info
%s: %s: mem=0x%lx, irq=%d hw_
DEBUG
base=0x%p,
DEBUG %s: %s, dev_info, version
DEBUG %s: driver unloaded, dev_info
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
INFO
280