D-Link DSR-150 User Manual page 285

Appendix D - Log Output Reference
%s%d: bad sequence number: %d, expected: %d,
PPPIOCDETACH file->f_count=%d,
PPP: outbound frame not passed
PPP: VJ decompression error
PPP: inbound frame not passed
PPP: reconstructed packet
PPP: no memory for
missed pkts %u..%u,
%s%d: resetting MPPC/MPPE compressor,
%s%d: wrong offset value: %d,
%s%d: wrong length of match value: %d,
%s%d: too big offset value: %d,
%s%d: cannot decode offset value,
%s%d: wrong length code: 0x%X,
%s%d: short packet (len=%d), __FUNCTION__,
%s%d: bad sequence number: %d, expected: %d,
%s%d: bad sequence number: %d, expected: %d,
PPPIOCDETACH file->f_count=%d,
PPP: outbound frame not passed
PPP: VJ decompression error
PPP: inbound frame not passed
PPP: reconstructed packet
PPP: no memory for
missed pkts %u..%u,
%s: INC_USE_COUNT, now %d, __FUNCTION__,
mod_use_count \
%s: DEC_USE_COUNT, now %d, __FUNCTION__,
mod_use_count \
PPPOL2TP %s: _fmt,
PPPOL2TP: --> %s, __FUNCTION__)
PPPOL2TP: <-- %s, __FUNCTION__)
%s: recv: , tunnel->name
%s: xmit:, session->name
D-Link DSR-Series User Manual
DEBUG TKIP
%s: cannot map channel to mode; freq
DEBUG
%u flags 0x%x,
DEBUG %s: %s, vap->iv_dev->name, buf
DEBUG %s: [%s] %s, vap->iv_dev->name,
%s: [%s] %s, vap->iv_dev->name,
DEBUG
ether_sprintf(mac), buf
[%s:%s] discard %s frame, %s, vap-
DEBUG
>iv_dev->name,
[%s:%s] discard frame, %s, vap->iv_
DEBUG
dev->name,
[%s:%s] discard %s information
DEBUG
element, %s,
[%s:%s] discard information element,
DEBUG
%s,
[%s:%s] discard %s frame, %s, vap-
DEBUG
>iv_dev->name,
[%s:%s] discard frame, %s, vap->iv_
DEBUG
dev->name,
DEBUG ifmedia_add: null ifm
DEBUG Adding entry for
DEBUG ifmedia_set: no match for 0x%x/0x%x,
DEBUG ifmedia_set: target
DEBUG ifmedia_set: setting to
ifmedia_ioctl: no media found for
DEBUG
0x%x,
ifmedia_ioctl: switching %s to , dev-
DEBUG
>name
DEBUG ifmedia_match: multiple match for
DEBUG <unknown type>
DEBUG desc->ifmt_string
DEBUG mode %s, desc->ifmt_string
DEBUG <unknown subtype>
DEBUG %s, desc->ifmt_string
DEBUG %s%s, seen_option++ ? , : ,
DEBUG %s%s, seen_option++ ? , : ,
DEBUG %s, seen_option ? > :
DEBUG %s: %s, dev->name, buf
%s: no memory for sysctl table!,
DEBUG
__func__
%s: no memory for VAP name!,
DEBUG
__func__
%s: failed to register sysctls!, vap-
DEBUG
>iv_dev->name
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
DEBUG
272