Administrator Settings; Change Password; Remote Management - D-Link DIR-412 User Manual

Mobile wireless router

Hide thumbs Also See for DIR-412:

Table of Contents

Section 3 - Configuration

This page will allow you to change the Administrator and User passwords. You can also enable Remote Management.

There are two accounts that can access the management interface through the web browser. The accounts are admin

and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot

make any changes. Only the admin account has the ability to change both admin and user account passwords.

Admin Password:

Enter and confirm a new password for the Administrator

the settings.

Enable Graphical

Check this box to enable graphical authentication. The

Authentication:

device supports this function to prevent phishing.

Enable Remote

Remote management allows the DIR-412 to be

Management:

configured from the Internet by a web browser. A

username and password is still required to access the

Web-Management interface. In general, only a member

of your network can browse the built-in web pages

to perform Administrator tasks. This feature enables

you to perform Administrator tasks from the remote

(Internet) host.

Remote Admin

The port number used to access the DIR-412.

Port:

Example: http://x.x.x.x:8080 whereas x.x.x.x is the

Internet IP address of the DIR-412 and 8080 is the

port used for the Web Management interface.

D-Link DIR-412 User Manual

Administrator Settings

Table of Contents