D-Link DSR-150 User Manual page 256

Appendix D - Log Output Reference
Setting version %d
PEAP pkt rcvd: data len=(%d) flags=(%d)
version=(%d)
Got PEAP/Start packet.
Got first fragment
Got fragment (n)
Got last fragment
Got unfragmented message
Got frag ack.
Ext AVP parsed: flags=(0x%x)
Mandatory bit not set: WARNING
Ext AVP parsed: type=(%d)
Ext AVP parsed: value=(%d)
Got PEAPv0 success!
Got PEAPv0 failure!
pCtx NULL.
Authenticator response check: Error
Authenticator response check: Failed
MS-CHAP2 Response AVP size = %u
Created EAP/MS-CHAP2 context: OK.
pCtx NULL.
Deleted EAP/MS-CHAPv2 context: OK
Not authenticated yet.
Authenticator response invalid
EAP-MS-CHAPv2 password changed.
rcvd. opCode %d.
pCtx NULL.
TLS message len changed in the fragment,
ignoring.
no data to send while fragment ack
received.
TLS handshake successful.
Created EAP/TTLS context: OK
D-Link DSR-Series User Manual
DEBUG Processing PEAP message: ERROR
DEBUG Processing PEAP message: ERROR
DEBUG Indicated length not valid: ERROR
Did not get Acknowledged result:
DEBUG
ERROR
DEBUG Cannot understand AVP value: ERROR
DEBUG eapExtResp is NULL: ERROR
eapWscCtxCreate: EAPAUTH_MALLOC
DEBUG
failed.
eapWscProcess: umiIoctl req to WSC
DEBUG
failed, status = %d
DEBUG eapWscCheck: Invalid frame
DEBUG eapWscBuildReq: Invalid state %d
eapWscProcessWscResp: Invalid data
DEBUG
recd pData = %p, dataLen"
Data received for invalid context,
DEBUG
dropping it
eapWscProcessWscResp: Build Request
DEBUG
failed
eapWscProcessWscResp: Invalid state
DEBUG
%d
eapWscProcessWscResp: Message
DEBUG
processing failed 0x%X
eapWscProcessWscData: Invalid
DEBUG
notification recd %d
DEBUG unable to initialize MD5
DEBUG MDString: adpDigestInit for md5 failed
DEBUG EAPAUTH_MALLOC failed.
DEBUG EAPAUTH_MALLOC failed.
DEBUG NULL context created: Error
DEBUG NULL context received: Error
DEBUG Authenticator ident invalid.
DEBUG Success request message invalid: Error
DEBUG Plugin context is NULL
DEBUG Deriving implicit challenge: Error
DEBUG Generating NT response: Error
DEBUG NULL in/out buffer: Error
DEBUG Incorrect vendor id.
DEBUG Allocating memory for outBuff: ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
ERROR
243