Section 9 - Maintenance
Path: Maintenance > Management > SNMP > Access Control List
To edit, delete, or create a new access control entry:
1. Click Maintenance > Management > SNMP > Access Control List tab.
2. Right-click an entry and select either Edit or Delete. To add a new trap, click Add Access Control.
3. Complete the fields from the table below and click Save.
Field
IP Address
Subnet Mask
Community
Access Type
Save
D-Link DSR-Series User Manual
Access Control
The IP Address of the SNMP agent.
The network mask used to determine the list of allowed SNMP managers.
The community string to which the agent belongs. Most agents are configured to listen for traps in the
Public community.
Access will be either read only (ROcommunity) or read-write (RWcommunity).
Click to save and activate your settings.
Description
175