D-Link DSR-150 User Manual page 122

Section 7 - VPN
4. Complete the fields from the table below and click Save.
Network Resource
Field
Policy Type
Available Groups/Users
Apply Policy To
Policy Name
IP Address
Mask Length
ICMP
Begin/End
Defined Resources
Service
Permission
Save
D-Link DSR-Series User Manual
Select Global, Group, or User.
If you selected Group, select a group from the drop-down menu. If you selected User,
select a user from the drop-down menu.
Select Network Resource, IP Address, IP Network, or All Addresses.
Enter a unique name for this policy.
If you selected IP Address or IP Network, enter the IP address.
If you selected IP Network, enter the mask length (0-32).
Toggle to ON to include ICMP traffic.
Enter a port range or leave blank to include all TCP and UDP ports. These fields are not
available when selecting Network Resource.
If you selected Network Resource, select the resource for the Defined Resource drop-
down menu. If you have not created a resource, refer to "Resources" on page 112 to create
a defined resource.
Select either VPN Tunnel, Port Forwarding, or All. This field is not available when
selecting Network Resource.
Select either Permit or Deny.
Click to save your settings.
IP Address
Description
109