Administrator Settings; Change Password; Remote Management - D-Link DIR-615 User Manual

Section 3 - Configuration
This page will allow you to change the Administrator and User passwords. You can also enable Remote Management. There are two accounts that
can access the management interface through the web browser. The accounts are admin and user. Admin has read/write access while user has
read-only access. User can only view the settings but cannot make any changes. Only the admin account has the ability to change both admin and
user account passwords.
Admin Password:
Enter a new password for the Administrator Login Name. The administrator can
make changes to the settings.
User Password:
Enter the new password for the User login. If you login as the User, you can only
see the settings, but cannot change them.
Gateway Name:
Enter a name for the DIR-615 router.
Enable Graphical Enables a challenge-response test to require users to type letters or numbers
Authentication:
from a distorted image displayed on the screen to prevent online hackers and
unauthorized users from gaining access to your router's network settings.
Enable HTTPS Server: Check to enable HTTPS to connect to the router securely.
Enable Remote
Remote management allows the DIR-615 to be configured from the Internet by
Management: a web browser. A username and password is still required to access the Web-
Management interface. In general, only a member of your network can browse
the built-in web pages to perform Administrator tasks. This feature enables you
to perform Administrator tasks from the remote (Internet) host.
The port number used to access the DIR-615.
Remote Admin
Example: http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-615
Inbound Filter:
and 8080 is the port used for the Web Management interface. If you have enabled
HTTPS.Server and checked Use.HTTPS, you must enter https:// as part of the URL to access the router remotely.
This section will list any rules that are created. You may click the Edit icon to change the settings or enable/disable the rule, or click the Delete icon to
Details:
remove the rule.
D-Link DIR-615 User Manual

Administrator Settings

Change Password

Remote Management

60