Table of Contents
Advertisement
Installation and Setup
Setup the lamp
The lamp position can be adjusted at any time, using a set of electronically controlled motors. An
optimal position for the lamp, with respect to the reflector and the integrator rod, results in
maximum brightness. This geometry is software controlled using the LampLOC calibration process.
Touch panel controller
The touch panel controller (TPC) is a touch-sensitive screen. Use the TPC to control the projector,
manage sources, adjust the display, and view status information. The TPC is mounted on the rear of
the projector and can be adjusted to improve the TPC viewing angle. A side USB port can be used to
download log files and install software upgrades.
For remote applications, the TPC can be dismounted from the projector and used with the optional
cable to allow projector control from a maximum distance of 100 ft (30 m).
D4K3560 Setup Guide
26
020-101161-05 Rev. 1 (06-2015)
Advertisement
Table of Contents
