Table of Contents
Advertisement
•
19 mm and 7/8" wrenches
•
Assorted Allen keys (metric)
•
Christie approved protective safety clothing if working with the lamp
•
Lens cleaning tissue and solution
Projector components
A
ID
A
Touch panel controller
(TPC)
B
LED status indicators
C
Manual douser override
D
Lamp door and lamps
E
Exhaust duct and vane
switch
F
Liquid cooling air filter
cover and air filter
D4K3560 Setup Guide
020-101161-05 Rev. 1 (06-2015)
D
B
C
B
J
LENS SIDE
Description
A touch-sensitive screen used to control and monitor operation.
LED color and blinking rates (located in both back corners of the projector)
provide information about the status of the projector using color and blinking
rates. For information about projector states and status, see
status indicators on page
Closing the douser rotates a shutter blade in front of the lamp and reduces the
lamp power to 2.0 kW to conserve lamp life. The override is for emergency use
only.
The lamp door provides access to the lamp compartment and must remain
closed and locked for normal operation. Lamp replacement should only be
performed by qualified technicians. For a complete list of available lamp types,
see the
D4K3560 User Manual (P/N:
Extracts heated air from the lamp compartment. The vane switch mounted inside
the rigid port monitors airflow. See
Filters air before it circulates to cool the heat exchanger.
LAMP SIDE
E
I
34.
020-101075-XX).
Site requirements
Installation and Setup
F
G
H
Projector LED
on page 11.
12
Advertisement
Table of Contents
