Seagull Models ET 6 - TEXAN Assembly Manual page 2

ET6.
INTRODUCTION.
Thank you for choosing the ET 6 ARTF by SEAGULL EP. The ET 6 was designed with the
intermediate/advanced sport flyer in mind. It is a semi scale airplane which is easy to fly and quick
to assemble. The airframe is conventionally built using balsa, plywood to make it stronger than the
average ARTF , yet the design allows the aeroplane to be kept light. You will find that most of the work
has been done for you already.Flying the ET 6 is simply a joy.
This instruction manual is designed to help you build a great flying aeroplane. Please read this
manual thoroughly before starting assembly of your ET 6. Use the parts listing below to identify all
parts.
WARNING.
Please be aware that this aeroplane is not a toy and if assembled or used incorrectly it is
capable of causing injury to people or property. WHEN YOU FLY THIS AEROPLANE YOU
ASSUME ALL RISK & RESPONSIBILITY.
If you are inexperienced with basic R/C flight we strongly recommend you contact your R/C
supplier and join your local R/C Model Flying Club. R/C Model Flying Clubs offer a variety of training
procedures designed to help the new pilot on his way to successful R/C flight. They will also be able
to advise on any insurance and safety regulations that may apply.
ADDITIONAL ITEMS REQUIRED.
Motor: Ep Motor
Speed control: 100A to 120A.
2
Instruction Manual.
Battery: Power battery
4 - 5 cells / 3000 - 5000 mAh.
Power battery.
Radio: 4channel with 5 digital servos
(mediumsize).