Factory Default; Lamp Counter Reset; Memory Viewer; Set Slide - Eiki EK-100W Owner's Manual

(3) When DHCP is set On, IP address, Subnet,
Gateway and DNS will be obtained
automatically, press the OK at "Set" to confirm
the parameters.
When DHCP is set Off, press the OK button to
enter IP address, then press  button to enter
Subnet, Gateway and DNS respectively,
press the OK at "Set" to confirm the parameters.
 Note:
See page 53 for usage of Network.

Factory default

This function returns all setting values except
for the User logo, PIN code lock, Logo PIN
code lock, Lamp counter and Filter counter to
the factory default settings.

Lamp Counter Reset

This function resets the counter of Lamp usage
hours.Please be sure to reset the lamp counter
after replacing the lamp. WARNING indicator
turns Off and the lamp replacement icon disap-
pears after reset the lamp counter.
Press < MENU > button on the remote con-
troller or on the top control panel to display
the OSD menu. Press button to select the
Expand menu, then press <OK> or button.
1) Press button to select [Lamp counter]
menu.
2) Press <OK > button.
3) Press button to select [Lamp counter
reset], then press <OK> button.
4) " Lamp replacement counter reset ? "
conformation box appear.
5) Select "Yes" and Press <OK> button.
50
Expand
LAN Network setting
DHCP Off
IP address 192 168 1 100
192 168 1 100
Subnet
255 255 255 0
Gateway 192 168 1 1
DNS 192 168 1 1
Set
Cancel
Adjust Select Esc Back
ENTER
Factory default
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
Lamp counter
Lamp counter
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
Lamp counter

Memory viewer

The Memory Viewer function makes it possible to project the pictures which are stored in the USB
memory when the USB memory is inserted into the projector
1 Press MEMORY VEIWER button on the remote control.
2 Press MENU button on the remote control to display screen menu. Press  button to select
"Memory Viewer", then press the OK button.
3 Press  button to select the item you want to set, press the OK button.
4 Press  button to adjust the item, then press the OK button.

Set Slide

Start the slide show.

Slide transition effect

Set the slide transition effect when the slide
show image is switching.
Slide down ... Switch the image from the top to
the bottom.
Slide right .... .Switch the image from the left to
the right.

Sort Order

Set the sort order of the slide show.
Extend Order ...... Sort files or folders in
extended order.
Size Order .......... Sort files or folders in
amount of data order.
Time Order ......... Sort files or folders in stored
time order.
Name Order ....... Sort files or folders in name
order.

Rotate

Set the rotate direction of image.
No Rotate ........... Rotate is disabled.
270 Degrees ...... Rotate 270 degrees in
anti-clockwise direction.
180 Degrees ...... Rotate 180 degrees.
90 Degrees ........ Rotate 90 degrees in anti-
clockwise direction.

Best Fit

Set the image whether or not to fit with the
projected screen.
On ...... Display the image to fit with the
aspect of the projected screen.
Off ...... Display in the normal pixels of the
image.
Memory Viewer menu
Memory
Viewer
Set slide
Slide transition effect Slide right
Sort order Name order
Rotate No rotate
Best fit Off

Repeat

Off

Apply

 Note:
● The "Memory Viewer" menu is available
when the input source choose "Memory
Viewer".
● The menu except for "Set Slide" which setting
have been changed is not yet effective
before the "Apply" is not executed.
● See page 61 for Memory viewer function.
Repeat
Set whether or not to play the slide show
repeatly.
On ...... Repeat broadcast the first file after the
last file is broadcasted.
Off ...... Return to the thumbnail display after
the last file is broadcasted.
Apply
Execute the setting in slide show.
Press  to select "Apply", then press the
OK button, the setting of the items except for
"Set Slide" will be effective.
51