Eiki EK-100W Owner's Manual page 22

HDMI setup
When the external equipment is connected to "HDMI" terminal, if the image is not projected
properly, please switch the settings of "Image" or "Sound" in "HDMI setup" menu.
1 Press the MENU button to display the screen
menu. Press  button to select the
"Setting" menu icon. Press the OK to enter
the submenu entry.
2 Press  button to select "HDMI setup"
and then press the OK button.
3 Press  button to select "Image" or
"Sound" to adjust.
4 Press  button to switch the item.
Image
64-940 ....... Select when the HDMI terminal
of an external device (such as a
blu- ray player) is connected to the"
HDMI" terminal.
0-1023 ...... Select when the DVI-D terminal
output of an external device (such
as a computer) is connected to the
"HDMI" terminal via a conversion
cable or similar cable. Select also
when the HDMI terminal output of
a computer or other device is
connected to the "HDMI" terminal.
Note:
The optimal setting varies depending on
the output setting of the connected external
device. Refer to the operation instruction of
the external device regarding the output of the
external device.
Sound
HDMI .......... Select when the HDMI cable is
connected, the image and audio
are transmitted, and you do not
need to connect the audio signal
separately.
Computer ... Select when the DVI-D terminal
output of an external device (such
as a computer) is connected to
the "HDMI" terminal via a
conversion cable or similar cable.
The sound will not be transmitted,
the audio signal is input to "AUDIO
IN" terminal.
42
Setting
Setting
On start Off
Standby mode Eco
High land Off
Lamp control
Cooling fast Normal
Closed caption Off
Key lock
Iris On
Terminal Computer 2
Sound
HDMI Setup
Expand
The projector has Expand menu that allows you to set the other various expand functions
described as follows.
1 Press MENU button on the remote control to display screen menu. Press  button to select
"Expand", then press the OK button.
2 Press  button to select the item you want to set, press the OK button.
3 Press  button to adjust the item, then press the OK button.
Language
This projector provides multi-language screen
menu.
You can press button to select the language
you want.
26 languages: English, German, French,
Italian, Spanish, Polish, Swedish, Dutch,
Portuguese, Japanese, Simplified Chinese,
Traditional Chinese, Korean, Russian,Arabic,
Turkey, Finland, Norway, Denmark, Indonesia,
Hungary, Czech Republic, Kazakhstan, Viet-
namese, Thai, Farsi.
Auto setup
Press AUTO button on the remote control to
execute "Input search", "Auto PC adj." and
"Auto keystone" functions.
Input search
Allows you to automatically detect input
signals. It stops when a signal is found. Press
 button to select an option below:
On ........ Enabled. This function is used to
detect input signals automatically
and stops when finding a signal.
Off ........ Disabled.
Auto PC adj.
On ........ Press the AUTO button on the
remote control or top control to
enable Auto PC adj. function
automatically.
Off ........ Cancel Auto PC adj. function.
Auto keystone
Auto ..... When detecting the projector is
tilted, correct the vertical keystone
in real time.
Manual ........ When pressing AUTO button on
the remote control or top control,
perform a vertical keystone.
Off ........ Disabled.
Expand menu
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
Lamp counter
Auto setup
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
Lamp counter
Note:

- "Input search", "Auto PC Adj." and "Auto Keystone"
cannot be set to "Off" at the same time. At least
one of them is set to "On".
- Sometimes the auto keystone maybe correct
image imperfectly, manual keystone is required.
- The Auto keystone function cannot work when
"Display" → "Project way" is set to "Ceiling/
Front" or "Ceiling/Rear".
43