Table of Contents
Advertisement
(1) Press MENU button on the remote control to
display screen menu. Press button to
select Expand, then press the OK button.
(2) Press button to select Network, and
then press the OK button to enter the network
menu.
MAC address ... Displays the MAC address
IP address .........Displays the IP address of
(3) When DHCP is set On, IP address, Subnet,
Gateway and DNS will be obtained
automatically, press the OK at "Set" to confirm
the parameters.
When DHCP is set Off, press the OK button to
enter IP address, then press button to enter
Subnet, Gateway and DNS respectively,
press the OK at "Set" to confirm the parameters.
Factory default
This function returns all setting values except
for the PIN code lock, Logo PIN code lock,
Lamp counter and Filter counter to the factory
default settings.
Lamp Counter Reset
This function resets the counter of Lamp usage
hours. Please be sure to reset the lamp counter
after replacing the lamp. WARNING indicator turns
Off and the lamp replacement icon disappears
after reset the lamp counter.
Press < MENU > button on the remote controller or
on the top control panel to display the OSD menu.
Press button to select the Expand menu, then
press <OK> or button.
1) Press
button to select [Lamp counter]
menu.
2) Press <OK > button.
3) Press
button to select [Lamp counter reset],
then press <OK> button.
4) " Lamp replacement counter reset ? "
conformation box appear.
5) Select "Yes" and Press <OK> button.
Expand
of wired network of this
projector.
wired network of this
projector.
LAN
DHCP
IP address
Subnet
Gateway
DNS
Move
ENTER
LAN
DHCP
IP address
Subnet
Gateway
DNS
Move
ENTER
ENTER
Note:
See page 54 for usage of Network.
Lamp Counter
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
Lamp counter
Network setting
On
Cancel
Set
Next
Back
MENU
Network setting
Off
192
168
1
100
192
168
1
100
255
255
255
0
192
168
1
1
192
168
1
1
Cancel
Set
Next
Back
MENU
51
Advertisement
Table of Contents
