Eiki EK-100W Owner's Manual page 30

Network Control Instructions
"Network Setup" page
① LAN Setup
Select [Obtain an IP address automatically]
if you want to enable the DHCP client.
IP Address
Enter the IP address when not using a DHCP
server.
Subnet
Enter the subnet mask when not using a
DHCP server.
8. PwPresenter software: when "Network" is selected in Source Select, you can project the current
computer images via network.
Input the IP address of the projector in webpage to enter the Network Display System, click
"Download" to download the pwPresenter software according to your operation system.
9. Click icon to access the pwPresenter software.
①
58
Gateway
Enter the default gateway address when
not using a DHCP server.
DNS
Enter the DNS server when not using a
DHCP server.
② Apply
Updates the settings.
⑥
② ③
④ ⑤
Search for projector display
①
Click to enter Search, select the projector and connect it. Please setting the same IP address of
the projector in pwPresenter software, (such as: 192.168.1.100). Both the initial name and
passwords are "admin".
①
Note:
②
● Before use pwPresenter software to search, you need change Source Select to
Play/Pause
②
Play or pause the selected image.
③ Choose capture mode
Choose a capture mode from "FullScreen", "FixedSize" or "Alterable."
④ Parameters Setting
Basic Setting: setting language,region of
capture image etc,.
Network Control Instructions
Advanced Setting: setting image quality,
network port etc,.
"Network".
59