Eiki EK-100W Owner's Manual page 18

System
Computer system select
The projector automatically tunes to various types of computers with its function of Multi-scan system and
Auto PC Adjustment. If a computer is selected as a signal source, the projector automatically detects the
signal format and tunes to project proper images without any additional setting.
One of the following messages may appear:
When the projector cannot recognize
Auto
the connected signal conforming to
the provided computer system, Auto
is displayed on the System menu
box and the Auto PC Adj. function
works to display proper images. If
the image is not projected properly, a
manual adjustment is required.
There is no signal input from computer.
-----
Check the connection between your
computer and projector.
Select computer system manually
The system can also be selected manually.
1 Press MENU button on the remote control or
on top control to display the screen menu.
Press  button to select the "Display" icon,
and press the OK button.
2 Press  button to select "System" and
press the OK button.
3 Press  button to select your required
system, and then press the OK button.
Note:

When HDMI, Network, Memory Viewer, USB
Display is selected, System menu for computer
is disable.
Video or S-video
Auto
The projector automatically detects an incoming
video system,and adjusts itself to optimize its
performance. When Video System is PAL-M,
PAL-N or PAL60, select the system manually.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N/
PAL60
If the projector cannot reproduce proper video
images, select a specific broadcast signal format
from PAL, SECAM, NTSC, NTSC 4.43, PAL-M,
PAL-N and PAL60.
34
Display
System menu
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System
1024 x 768, 60Hz
System
System for computer signal
Display
System
1024 x 768, 60Hz
----
----
----
----
----
System for Video or S-video signal
Display
System
AUTO
PAL
SECAM
NTSC
NTSC4.43
PAL-M
PAL-N
PAL60
Color adjust menu is used to set the image mode and adjust the image.
1 Press MENU button on the remote control or
top control to display screen menu. Press
 button to select "Color adjust", then
press the OK button.
2 Press button to select the item you
want to set, press the OK button.
3 Press button to adjust the item, then
press the OK button.
17
Image Mode
0
0
Direct operation
0
Normal
Press IMAGE button on the remote control to
Front
select the image mode.
Center
Blue
Menu operation
1 Press MENU button on the remote control or
top control to display screen menu. Press
 button to select "Color adjust" menu,
then press the OK button.
2 Press button to select "Image mode",
press the OK button.
3 Press button to select the item you want
to set, press the OK button.
Dynamic
The light output is maximized for use in bright
areas.
Standard
The picture becomes suitable for moving images
in general.
Cinema
For watching movies with multiple gray scale
levels.
Blackboard (Green)
For viewing the image projected on a blackboard
(green) by enhancing the image quality. This is
mainly effective on a green colored board instead
of a black colored board.
Colorboard
For images projected onto a red, blue, yellow, or
green wallpaper.
User Image
Image quality preset by the user in the Image
adjustment menu.
Color adjust
INPUT
VGA VIDEO HDMI
AUTO MENU
Remote control
KEYSTONE IMAGE FREEZE PATTERN
SCREEN LAMP MUTE INFO.
BLANK
+ +
D.ZOOM VOLUME
Image mode (Computer) TIMER
- -
Color adjust
Image mode
Contrast
Brightness
Color temp.
Red
Green
Blue
Sharpness
IMAGE
button
Standard
32
32
Mid
32
32
32
8
35