Eiki EK-100W Owner's Manual page 20

The projector has "Setting" menu that allows you to set the other various functions described as
follows.
1 Press MENU button on the remote control or
top control to display screen menu. Press
 button to select "Setting", then press
the OK button.
2 Press button to select the item you
want to set, press the OK button.
3 Press button to adjust the item, then
press the OK button.
On start
Enable the projector to be turned on
automatically just by connecting the AC
power cord to an outlet when this function
is set to On.
On
Start the projection immediately, enter
countdown display.
Off
Start up in the standby mode.
Standby mode
This function is available when operating the
projector via network.
Press button to select the item below:
Eco.
Restrict some functions in the standby mode to
reduce power consumption. In this case, you
cannot use network functions and some RS-232C
commands.
Normal
Do not restrict network function and serial
communication function even in the standby
mode.
38
Setting
Setting menu
Setting
On start
Standby mode Eco
High land
Lamp control
Cooling fast Normal
Closed caption
Key lock
Iris On
Terminal Computer 2
Sound
HDMI Setup
On start
Setting
On start
Standby mode Eco
High land
Lamp control
Cooling fast Normal
Closed caption
Key lock
Iris On
Terminal Computer 2
Sound
HDMI Setup
Standby mode
Setting
On start Off
Standby mode Eco
High land Off
Lamp control
Cooling fast Normal
Closed caption Off
Key lock
Iris On
Terminal Computer 2
Sound
HDMI Setup
High land
Enable to control the fan through the Setting
menu.
You can select the running speed of the fan
according to the altitude of the location where
Off
the projector is installed.
Off
Off
Normal speed. Set it so if the projector is
Off
operated at a lower altitude.
On
Faster than Off. Set it so if the projector is
operated at a higher altitude as fans will produce
weaker effects.
Note:
Please set High land "On" when operating the
projector higher than 1400 meters.
Lamp control
Off
Change the brightness of the screen.
Off
Normal .... Normal brightness.
Off
Eco .......... Lower brightness, reducing
Cooling fast
This function provides the following options in
the cooling fans' operation after turning off the
projector.
Normal
Normal cooling speed.
60 sec
Faster and lounder than Normal, cooling time
is shorter.
0 sec
Enable you directly unplug the AC power cord
after turning off the projector, no need waiting for
cooling.
Note:
When it is set to "0 sec", you cannot restart the projector immediately after the power-off. The
lamp remains high temperature and needs to be cooled, so it takes longer time than
usual for the lamp to light up again.
Setting
High land
Lamp control
power consumption and
extending the lamp life.
Cooling fast
Setting
On start Off
Standby mode Eco
High land Off
Lamp control
Cooling fast Normal
Closed caption Off
Key lock
Iris On
Terminal Computer 2
Sound
HDMI Setup
Setting
On start Off
Standby mode Eco
High land Off
Lamp control
Cooling fast Normal
Closed caption Off
Key lock
Iris On
Terminal Computer 2
Sound
HDMI Setup
Setting
On start Off
Standby mode Eco
High land Off
Lamp control
Cooling fast Normal
Closed caption Off
Key lock
Iris On
Terminal Computer 2
Sound
HDMI Setup
39