Amx D.d; Network Factory Default - Eiki LC-WUL100AL Owner's Manual

AMX D.D.

AMX D.D.
Choose "AMX D.D." in the Network menu and press SELECT button, select ON to allow the
projector to be detected by AMX Device Discovery.
For more details, please visit the following website. http://www.amx.com/.

Network factory default

1. Select "Network factory default" in the Network menu and press SELECT button.
2. A confirmation box appears and select "Yes" and then press SELECT button.
3. Another confirmation box appears and select "Yes" and then press SELECT button.
4. All the wired LAN settings will go back to the factory default settings. For details, refer to
"Wired LAN factory default settings". (p.16)
* "Crestron control" (p.25) settings and projector name (p.24) also will go back to the fac-
tory default settings.
15