Eiki EK-100W Owner's Manual page 17

Aspect
You can set a screen size to fit the image while
maintaining the aspect ratio of the input signal.
1. Press  to select "Aspect" and then
press the OK button.
2. Press  button to select the item, then
press the OK button.
Normal
Projects the image at the maximum size while
maintaining the aspect ratio of the input signal.
Wide
Projects the image at 16:9 aspect ratio.
Full
To provide an image to fit the screen.
Advanced (PC input only)
Adjust the proportion and position of the screen
manually.
Project Way
This function is used to set the project way.
1 Press MENU button on the remote control
to display screen menu. Press  button to
select "Display", then press the OK button.
2 Press button to select "Project way",
press the OK button.
3 Press button to select the item you want
to set, press the OK button.
Front
Projects to front screen when projector is front
standing.
Rear
Projects to rear screen when projector is front
standing.
Ceiling/Front
Projects to front screen when projector is in ceiling
state.
Ceiling/Rear
Projects to rear screen when projector is in ceiling
state.
Auto ceiling/Front
Projects to front screen and modify as front
standing or ceiling automatically.
Auto ceiling/Rear
Projects to rear screen and modify as front
standing or ceiling automatically.
32
Display
Aspect menu
Display
Auto PC adj.
Fine sync 17
H Position
V Position
H. Size
Aspect Normal
Project way Front
Menu position Center
Background display Blue
System 1024 x 768, 60Hz
Project way menu
Display
Auto PC adj.
Fine sync 17
H Position
V Position
H. Size
Aspect Normal
Project way Front
Menu position Center
Background display Blue
System 1024 x 768, 60Hz
Menu Position
This function is used to change the position of
screen menu.
1 Press MENU button on the remote control
0
to display screen menu. Press  button to
0
select "Display", then press the OK button.
0
2 Press button to select "Menu position",
press the OK button.
3 Press button to select the item you want
to set, press the OK button.
Upper left
Menu locates on upper left of the screen.
Upper right
Menu locates on upper right of the screen.
Center
Menu locates at the center of the screen.
Lower left
Menu locates on lower left of the screen.
Lower right
Menu locates on lower right of the screen.
Background Display
0 This function is used to select the screen
0
background of the projector when there is no
0
signal detected.
1 Press MENU button on the remote control
or top control to display screen menu. Press
 button to select "Display", then press
the OK button.
2 Press  button to select "Background
display", press the OK button.
3 Press  button to select the item you want
to set, press the OK button.
Black .... Select black background.
Blue ...... Select blue background.
Display
Menu position
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System 1024 x 768, 60Hz
Background display
Display
Auto PC adj.
Fine sync
H Position
V Position
H. Size
Aspect
Project way
Menu position
Background display
System 1024 x 768, 60Hz
17
0
0
0
Normal
Front
Center
Blue
17
0
0
0
Normal
Front
Center
Blue
33