Terminals; Top Control And Indicators - Eiki EK-100W Owner's Manual

Part names and functions

Terminals

① ② ③
AUDIO VIDEO IN
R L
OUT
RS-232C
AUDIO IN
⑩ ⑪
① AUDIO OUT
Connect external audio amplifier to this jack.
② MONO(R/L)
For a mono audio signal (a single audio
jack), connect it to MONO(R/L) jack.
③ VIDEO IN
This is the terminal to input video signals.
④ VGA IN 2/VGA OUT
- Connect a computer output to this terminal.
- Output the analog signal form ② to other
monitor.
⑤ HDMI / MHL
This is the terminal to input the HDMI or MHL
signals.
⑥ HDMI
This is the terminal to input HDMI signals.
⑦ USB-A
When using the "Memory Viewer" function,
insert the USB memory directly to this
terminal.(Refer to Page 51)
⑧ USB-B
This terminal is used to connect the
projector to the computer with a USB cable
when you want to use the "USB Display"
function.(Refer to Page 63)
10
④ ⑤ ⑥ ⑦ ⑧ ⑨
HDMI/ USB-A USB-B LAN
MHL
VGA IN 2 / VGA OUT
HDMI
VGA IN 1 / YPbPr / S-VIDEO IN
⑫ ⑬ ⑭
⑨ LAN
- This is the LAN terminal to connect to the
network.
- Connect the projector to the computer via
RJ45 cable when you use the "Network"
Display function.
⑩ AUDIO IN
This is the terminal to input computer audio
signals.
⑪ RS-232C
When using RS232 to control the projector,
please connect the serial control line to this
terminal.
⑫ VGA IN 1/YCbCr/S-VIDEO IN
This is the terminal to input RGB, YCbCr or
S-video signals.
⑬ Remote Control receiver(BACK)
Operation the projector by remote control.
⑭ Kensington Security Slot
This slot is for a Kensington lock used to
deter theft of the projector.
* Kensington is a registered trademark of
ACCO Brands Corporation
Part names and functions

Top control and Indicators

① ②
⑥
① MENU
Open or close the screen menu.
② ▲▼◄►/UP/DOWN/VOL+/VOL-
- Select an item or adjust the value in the
screen menu.
- Pan the image in the D. Zoom +/- mode.
- Increase or decrease volume.
③ POWER
Turn on/off the projector.
④ WARNING indicator(Refer to Page 76)
- It flashes red when the internal projector
temperature is beyond the operating
temperature range.
- It lights red when the power supply of the
projector is abnormal.
③ ④ ⑤
⑦ ⑧
⑤ POWER indicator(Refer to Page 76)
- It lights red when the projector is in stand-
by mode.
- It lights green during normal operations.
- It flashes green in the Power management
mode.
- It flashes red during fans cooling.
⑥ AUTO
Perform various settings configured
automatically, including the "Input search" ,
"Auto PC adj." and "Auto keystone".
⑦ OK
- Enter menu operation.
- Execute the selected item.
⑧ INPUT
Select an input source.
11