Eiki EK-100W Owner's Manual page 28

Network Control Instructions
4. Activate the Web browser in the personal computer.
5. Enter the IP address set by the projector into the URL input field of the Web browser.
6. Select "Login" to login the Network Display System page. (Both the initial name and passwords
are "admin".)
 Note:
● You can click the upper right corner of the web browser screen to select the display language.
● Do not perform setting or control simultaneously by starting up multiple web browsers. Do not
set or control the projector from multiple computers.
● Change the password first. (8 half-width characters). (page 55)
● If the screen for the web control is not displayed, consult your network administrator.
7. Items in Network Display System page including: "System Status", "General Setup", "Picture
Setup", "Image Setup" and "Network Setup".
①
②
③
④
⑤
① System Status
The "System Status" page is displayed by
clicking this item.
② General Setup
The "General Setup" page is displayed by
clicking this item.
③ Picture Setup
The "Picture Setup" page is displayed by
clicking this item.
54
④ Image Setup
The "Image Setup" page is displayed by
clicking this item.
⑤ Network Setup
The "Network Setup" page is displayed by
clicking this item.
Network Control Instructions
"System Status" page
Display the status of the projector for the following items.
① Model Name
Displays the model No. of the projector.
② Versions
Displays the version of the firmware of the
projector.
"General Setup" page
Change Password for Webpage is displayed.
① Enter Old password
Enters the configured password.
② Enter New password
Enters the new password.
③ Confirm New password
Enters the wanted new password again for
confirmation.
①
②
③
③ LAN Status
Displays the connection status of the LAN.
①
②
③
④
⑤
⑥
④ Apply
Updates the settings.
⑤ Power
Switches on/off the power of the projector.
⑥ Source Select
Switches the input source of the projector.
55