Eiki EK-100W Owner's Manual page 14

Basic operation
BLANK button
Press BLANK button on the remote control to
black out the image. To restore to normal, press
the BLANK button again or press any other button.
The screen changes each time you press the
button as follows:
Black out →Normal →Black out →Normal ...
TIMER button
Press TIMER button. The timer display "00:00"
appears on the screen and the timer starts to
count time (00:00–59:59).
To stop the Timer, press TIMER button. Press
TIMER button again, and then the Timer display
disappears.
SCREEN button
Press SCREEN button on the remote control to
select the screen size you want.
(Normal / Wide / Full)
D.ZOOM+ button
Press D.ZOOM+ button, the on-screen menu will
disappear while the information on digital zoom +
appears.
Press ▲▼◄►to move the image horizontally and
vertically.
The moving is effective only when the image is
larger than the size of the screen.
D.ZOOM- button
Press D.ZOOM- button, the on-screen menu will
disappear while the information on digital zoom
appears.
To return to normal size, select " SCREEN" button
on the remote control to adjust screen size.
26
Blank Image
Blank
"Blank" disappears after 2 seconds if there
is no other button operation.
02 ： 02
Timer display
Remote control
INPUT
VGA VIDEO HDMI
AUTO MENU
KEYSTONE IMAGE FREEZE PATTERN
SCREEN LAMP MUTE INFO.
SCREEN
BLANK BLANK
+ +
D.ZOOM
D.ZOOM VOLUME TIMER
TIMER
- -
+/-
Basic operation
Input select
Direct Operation
Press VGA, ViIDEO or HDMI on the remote
control as input source.
Menu operation
1 Press INPUT button on the top control or
remote controll to display the input select
menu.
2 Press  button to select VGA 1, VGA 2,
HDMI, HDMI 2(MHL), Component, Video,
S-video, Network, Memory Viewer or USB
Display, then press the OK button.
When input source is from
VGA 1
computer connected to VGA IN 1
terminal with VGA cable, please
select "Computer 1".
When input source is from
VGA 2
computer connected to VGA IN 2 /
VGA OUT terminal with VGA cable,
please select "Computer 2".
When input source is from
HDMI
equipment connected to HDMI
terminal with HDMI cable, please
select "HDMI".
Select it when the input source
Component
is from the video equipment
connected to YPbPr terminal.
Select it when the video input
Video
signal is connected to VIDEO IN
terminal.
Note:
- When the "Input search" function is set to "On" in the "Auto setup" function, press AUTO button,
the input signal will be searched automatically.
- When VGA IN 2/VGA OUT terminal is used as VGA OUT, Computer 2 can not be selected.
Remote control
INPUT
INPUT
VIDEO
VGA VIDEO HDMI
VGA
HDMI
AUTO MENU
Top control
KEYSTONE IMAGE FREEZE PATTERN
SCREEN LAMP MUTE INFO.
BLANK
+ +
D.ZOOM VOLUME TIMER
- -
INPUT button
Input select menu
VGA 1
VGA 2
HDMI
HDMI 2(MHL)
Component
Video
S-video
Network
Memory Viewer
USB Display
27