Factory Default - Eiki EK-355UK Owner's Manual

(3) When DHCP is setting as On, IP address,
Subnet, Gateway and DNS will be obtained
automatically, press the OK at "Set" to confirm
the parameters.
When DHCP is setting as Off, press the OK
button to enter IP address, then press  button
to enter Subnet, Gateway and DNS
respectively, press the OK at "Set" to confirm the parameters.
Note:

See page 57 for usage of Network.

Factory default

This function returns all setting values except
for the PIN code lock, Logo PIN code lock, Light
source counter and Filter counter to the factory
default settings.
Note:

The captured user logo image is deleted
when factory default is executed.
OSD setting-Expand
LAN
DHCP
IP address
Subnet
Gateway
DNS
Move
ENTER
ENTER
Factory Default
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
Network setting
Off
192 168 1 100
192 168 1 100
255 255 255 0
192 168 1 1
192 168 1 1
Set Cancel
Next Back
MENU
53