Connecting To The Mains Power Supply - Wincor Nixdorf BEETLE /L User Manual

Cabling of the BEETLE

Connecting to the mains power supply

All devices belonging to the modular BEETLE /L POS system that
have a separate power cable must be connected to the same electric
circuit.
GB - 16
BEETLE /L - the individual POS system
Ensure that the power switch on the POS terminal housing
is switched off.
Make sure that all data cables on the system unit and
peripherals are connected correctly.
Plug all power cables belonging to the BEETLE and the
peripherals into the grounded-contact utility power sockets.
The power pack can be connected to all stand-
ard power supply networks. The unit adjusts
automatically to the respective voltage. A fan
provides the required ventilation. The maximum
output of the power pack is 135 W.
You can now
switch on the
BEETLE /L by
means of the
switch on the
front of the
housing. You
may have to
unlock the slide
and move it to the
left.